Includes:
–  1 start gate (5 sheets)
–  24 trees of various sizes (2 sheets)
–  30 tires (3 sheets)
–  10 hay bales (2 sheets)
–  5 m/16 ft road barrier (5 sheets)

Also available on our GitHub repositoy a special 3D-Printable pin model that can be used to attach the road barrier to the floor/table.

Comes with the papercraft accessories to give a nice finish to your track.

The road barrier can also be used to contain the cars if the track is placed on a table.

Size: 1.5X2.6m (4×8.5ft) (3kg, shipped as a special iteam)
Accessories included: 1 start gate; 24 trees; 30 tires; 10 hay bales; 5 m/16 ft road barrier
Easy Storage: The Mat is rolled inside a cardboard tube for easy storage.
Durable: The mat is in strong PVC, fabric reinforced and it’s walkable and weather resistant (However avoid standing water)
To attach the road barrier you can use duct tape or a special 3D-Printable pin model available on our GitHub repository.

The battery is also packed with an ultra resistant cover for extra durability.

Full Specs

• LiPo technology
• 150mAh capacity
• 20C Max power
• High Strength cover
• JST PH Connector

The shield includes two complete sets of pins, one low profile, for ultra compact creations, and one standard, with an higher clearance from the 3DRacers Pilot board to solder your components even on the bottom of the shield.

This protoboard sports also a cut-trace connection from the first row of solder joints and the 3DRacers Pilot ports.

Full Specs

• 8×7, double sided
• 2X6 Low profile male square pins included
• 2X6 standard male square pins included
• cut-trace on the first row of joints
• Fits perfectly inside the car with the LiPo battery plugged

Full Specs

• MPU6050 processor
• Gyro (3-axes) angular rate sensor. Sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
• Accelerometer (3-axes) with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
• Digital Motion Processing (DMP) engine offloads complex MotionFusion, with output in quaternions, Euler angles, etc.
• Can find the absolute orientation of the car even after 30 minutes of race
• Chainable with a digital compass sensor
• Simple I2C interface with extensive examples available in the standard 3DRacers Library
• Digital-output temperature sensor

Join the race with this fantastic product that blends RC racing with hi-tech electronics.

Created thanks to the contribution of a successful crowdfunding campaign, this highly acclaimed product revolutionized the RC world with a new, videogame-like approach to the classic RC car races.

Thanks to the free smartphone app, you can join the race with up to 1.000 other pilots, and compete for the palm of the fastest pilot and smartest mechanic with the power of Arduino and Open Source hardware.

Highly customizable

Customize your car with 10 different car bodies and 100 accessories, or download new ones from the community.
Also, thanks to the programmable ATMEGA32u4 Arduino MCU, customize your driving experience or create new vehicles and autonomous robots.

But don’t worry, the powerful electronic boards comes pre-programmed with RacerOS, the exclusive Arduino-compatible software that power each 3DRacers.

So don’t need to know how to code, but if you finally decide to give it a try, 3DRacers will offer the right platform to start learning the wonders of microcontrollers programming.

Easy to use

The Kit contains everything required to build you own 3D-Printed car or robot: with a 3DRacers Pilot control board, high speed steering servo, LiPo battery with charger and all the mechanical parts.

The car body prints easily in less than 2 hours, and it is designed to circumvent the most common print problems. Assembly is easy and requires less than 10 minutes and is supported by a detailed guide.

Hardware

The micro servo weight less than 3g, with a 160° rotation angle.

The kit contains also a 150mAh 20C LiPo battery and a full set of gears, axles and screws.

The 3DRacers Pilot board (not included) sports a Bluetooth Low Energy radio, ATMEGA32u4 MCU (the same of Arduino Leonardo), USB micro for programming and charging.

LiPo Charger, 2-motors controller with 1 high power micro motor on-board, 2 micro JST plugs for servos and expansions, an RGB led, ON/OFF switch.

On the bottom there is a IR sensor for gates and lap detection.

Full Specs

• ATMega32U4 processor
• Motor driver for 2 DC Motors DRV8835
• Bluetooth Low Energy 4.1 radio
• LiPo battery charger LM73831
• Drive 2 Servo, 2 DC Motors, 8 digital/analog IN/OUT Pins
• On board high efficency DC motor
• RGB Led WS2812
• IR Gate sensor
• Programmable via USB
• Shield support: Accelerometer/Gyro Shield, Proto Shield

Created thanks to the contribution of a successful crowdfunding campaign, this highly acclaimed product revolutionized the RC world with a new, videogame-like approach to the classic RC car races.

Thanks to the free smartphone app, you can join the race with up to 1.000 other pilots, and compete for the palm of the fastest pilot and smartest mechanic with the power of Arduino and Open Source hardware.

What’s included

• A Pilot control board, 150mAh LiPo battery, High precision Servo drive, Gears, axles and all the screws required. Free App available for download.
• 3D Print parts not included.

Highly customizable

Customize your car with 10 different car bodies and 100 accessories, or download new ones from the community.
Also, thanks to the programmable ATMEGA32u4 Arduino MCU, customize your driving experience or create new vehicles and autonomous robots.

But don’t worry, the powerful electronic boards comes pre-programmed with RacerOS, the exclusive Arduino-compatible software that power each 3DRacers.

So don’t need to know how to code, but if you finally decide to give it a try, 3DRacers will offer the right platform to start learning the wonders of microcontrollers programming.

Easy to use

The Kit contains everything required to build you own 3D-Printed car or robot: with a 3DRacers Pilot control board, high speed steering servo, LiPo battery with charger and all the mechanical parts.

The car body prints easily in less than 2 hours, and it is designed to circumvent the most common print problems. Assembly is easy with and requires less than 10 minutes and is supported by a detailed guide.

Hardware

The 3DRacers Pilot board sports a Bluetooth Low Energy radio, ATMEGA32u4 MCU (the same of Arduino Leonardo), USB micro for programming and charging.

LiPo Charger, 2-motors controller with 1 high power micro motor on-board, 2 micro JST plugs for servos and expansions, an RGB led, ON/OFF switch.

On the bottom there is a IR sensor for gates and lap detection.

The micro servo weight less than 3g, with a 160° rotation angle.

The kit contains also a 150mAh 20C LiPo battery and a full set of gears, axles and screws.

Full Specs

• ATMega32U4 processor
• Motor driver for 2 DC Motors DRV8835
• Bluetooth Low Energy 4.1 radio
• LiPo battery charger LM73831
• Drive 2 Servo, 2 DC Motors, 8 digital/analog IN/OUT Pins
• On board high efficency DC motor
• RGB Led WS2812
• IR Gate sensor
• Programmable via USB
• Shield support: Accelerometer/Gyro Shield, Proto Shield

Comes pre-programmed with the 3DRacers RacerOS firmware and can be programmed via USB with Arduino IDE.

Tech Specs

• ATMega32U4 processor
• Motor driver for 2 DC Motors DRV8835
• Bluetooth Low Energy 4.1 radio
• LiPo battery charger LM73831
• Drive 2 Servo, 2 DC Motors, 8 digital/analog IN/OUT Pins
• On board high efficency DC motor
• RGB Led WS2812
• IR Gate sensor
• Programmable via USB
• Shield support: Accelerometer/Gyro Shield, Proto Shield

Join the race with this fantastic product that blends RC racing with hi-tech electronics.

Created thanks to the contribution of a successful crowdfunding campaign, this highly acclaimed product revolutionized the RC world with a new, videogame-like approach to the classic RC car races.

Thanks to the free smartphone app, you can join the race with up to 1.000 other pilots, and compete for the palm of the fastest pilot and smartest mechanic with the power of Arduino and Open Source hardware.

Highly customizable

Customize your car with 10 different car bodies and 100 accessories, or download new ones from the community.
Also, thanks to the programmable ATMEGA32u4 Arduino MCU, customize your driving experience or create new vehicles and autonomous robots.

But don’t worry, the powerful electronic boards comes pre-programmed with RacerOS, the exclusive Arduino-compatible software that power each 3DRacers.

So don’t need to know how to code, but if you finally decide to give it a try, 3DRacers will offer the right platform to start learning the wonders of microcontrollers programming.

Easy to use

The full kit contains everything required to build you own 3D-Printed car or robot: with a 3DRacers Pilot control board, high speed steering servo, LiPo battery with charger and all the mechanical parts.

The car body prints easily in less than 2 hours, and it is designed to circumvent the most common print problems. Assembly is easy and requires less than 10 minutes and is supported by a detailed guide.

Hardware

The 3DRacers Pilot board sports a Bluetooth Low Energy radio, ATMEGA32u4 MCU (the same of Arduino Leonardo), USB micro for programming and charging.

LiPo Charger, 2-motors controller with 1 high power micro motor on-board, 2 micro JST plugs for servos and expansions, an RGB led, ON/OFF switch.

On the bottom there is a IR sensor for gates and lap detection.

This is the Pilot board only, while the full kit contains also:

The micro servo weight less than 3g, with a 160° rotation angle.

The kit contains also a 150mAh 20C LiPo battery and a full set of gears, axles and screws. (not included in this bundle)